Installation method of kitchen pendant lamp

April 13, 2022 0 Comments

1. Pre-embed iron or wooden bricks (except water bricks) in the structural layer. The burial position should be accurate and there should be enough room for adjustment.

2. Transition connecting pieces are set on iron pieces and wooden bricks to adjust the error of the pieces, and can be nailed, welded and screwed through with the pieces.

3. Boom, sling and transitional connection.

4. The boom and sling are directly nailed or screwed to the secondary joists, or connected to the stand-up grid by the above-mentioned method of perforating the board surface. Or hang it on the additional cross joists between the secondary picking grids. The power of the light source used in the ceiling lamp: incandescent bulbs are 40-100W, and most fluorescent lamps are 30-40W.

Leave a Reply

Your email address will not be published.